Understanding OG-Comms – What You Need To Know
There are a lot of people who have no idea what OG-Comms series are all about. You have to understand that intercom units provide a way to work between two channels that are called 2-wire intercom audio and two channels of 4-wire line level signals and analog; these things are pretty complex to understand without the right guide. You have to understand that a OG-Comms unit can basically auto null each of the channels with a simple push of a button; this is something that most people don’t understand at all. Every 4-wire input as well as output channel levels will be checked and displayed all the time to make it easy for the team to understand; this is why you need nothing but the best OG-Comms. With a simple flip of a switch, these units can be around +28VDC party line voltage power source that can provide around 200ohm intercom audio and stop both of the channels. You need to use OG-Comms if you want to have the party line source terminated or removed just by flipping a simple switch back. You have to understand that a unit can be configured with the use of clear com party line or party line equipment with the front panel switch on it. The switch makes sure that it can adjust the output gain between the two party line circuits. You need to know that the 4 wire line level circuitry is going to depend on the type of unit that is used for interfacing with it.
Both 4 wire input channels and 4 wire output channels will require auto nulling for both to be able to achieve max return loss.
If you want to find a good OG-comms 4 wire input and output channel to help you, you have to do your homework first and research first before you actually hire one.
You should know that most OG-comms 4 wire input and output channels are really into focusing with the best quality digital products as well as brands. Always compared each OG-comms 4 wire input and output channel you find and consider their experience, skills, and knowledge in the field because you have to make sure that the professionals helping you know what they are actually doing.
You should know that OG-Comms are compatible with open gear, as well as industry standard card frames. You need to understand that OG-Comms can be controlled with an SNMP and monitored through the use of an industry standard dashboard software. You need to know that the open gear frame supplies a good amount of power. If you want extend the party line over fiber, you are going to need to add a multi dyne OG-3600 audio fiber transport to make it a lot faster.